The Cutting Tool Market Report (CTMR) News ReleaseContact:
Pat McGibbon, AMT, 703-827-5255
pmcgibbon@AMTonline.org
 
Susan Orenga, USCTI, 216-241-7333
sorenga@thomasamc.com

For Release: March 14, 2018


 

 

U.S. Cutting Tool Consumption Up 6.1 Percent In January

January U.S. cutting tool consumption totaled $183.61 million according to the U.S. Cutting Tool Institute (USCTI) and AMT – The Association For Manufacturing Technology. This total, as reported by companies participating in the Cutting Tool Market Report collaboration, was up 4.9 percent from December’s $175.00 million and up 6.1 percent when compared with the $173.05 million reported for January 2017. With a year-to-date total of $183.61 million, 2018 is up 6.1 percent when compared with 2017.

These numbers and all data in this report are based on the totals reported by the companies participating in the CTMR program. The totals here represent the majority of the U.S. market for cutting tools.
“The boom in domestic and global manufacturing has continued to show positive growth for the cutting tool industry. This is causing increasing pressure on cutting tool capacity and raw material sourcing, but these are good problems and are welcomed by the industry,” said Brad Lawton, Chairman of AMT’s Cutting Tool Product Group.

“Demand for cutting tools in January 2018 continued to demonstrate the ongoing improvement in manufacturing activity that continued throughout 2017. Sales increased 4.9 percent month over month in January and rose 6.1 percent over the same period a year ago, supporting our belief that the industrial sector will continue to strengthen as the year progresses,” said Eli Lustgarten, President at ESL Consultants. “The U.S. February ISM Manufacturing Index rose to 60.8 compared to 59.1 in January and 59.3 in December 2017. This was the best level since 2004 and the third highest since 1985.  New orders and production remain at very strong levels, building a backlog and pointing toward rising industrial production and higher capacity utilization as the year progresses. With an improving global backdrop, the cutting tool sector is headed toward another banner year with sales gain approaching if not exceeding 10 percent.”

The Cutting Tool Market Report is jointly compiled by AMT and USCTI, two trade associations representing the development, production and distribution of cutting tool technology and products. It provides a monthly statement on U.S. manufacturers’ consumption of the primary consumable in the manufacturing process – the cutting tool. Analysis of cutting tool consumption is a leading indicator of both upturns and downturns in U.S. manufacturing activity, as it is a true measure of actual production levels.

Historical data for the Cutting Tool Market Report is available dating back to January 2012. This collaboration of AMT and USCTI is the first step in the two associations working together to promote and support U.S.-based manufacturers of cutting tool technology.




















 



# # #

 

AMT - The Association For Manufacturing Technology LogoAMT – The Association For Manufacturing Technology represents and promotes U.S.-based manufacturing technology and its members—those who design, build, sell, and service the continuously evolving technology that lies at the heart of manufacturing. Founded in 1902 and based in Virginia, the association specializes in providing targeted business assistance, extensive global support, and business intelligence systems and analysis. AMT is the voice that communicates the importance of policies and programs that encourage research and innovation, and the development of educational initiatives to create tomorrow’s Smartforce. AMT owns and manages IMTS — The International Manufacturing Technology Show, which is the premier manufacturing technology event in North America.

The United States Cutting Tool Institute (USCTI) was formed in 1988 and resulted from a merger of the two national associations representing the cutting tool manufacturing industry. USCTI works to represent, promote, and expand the U.S. cutting tool industry and to promote the benefits of buying American-made cutting tools manufactured by its members. The Institute recently expanded its by-laws to include any North American manufacturer and/or remanufacturer of cutting tools, as well as post-fabrication tool surface treatment providers. Members, which number over 80, belong to seven product divisions: Carbide Tooling, Drill & Reamer, Milling Cutter, PCD & PCBN, Tap & Die, Tool Holder and All Other Tooling. A wide range of activities includes a comprehensive statistics program, human resources surveys and forums, development of product specifications and standards, and semi-annual meetings to share ideas and receive information on key industry trends.

 

# # #