Mechanical Safety Standards   Home > Standards and Regulations > Mechanical Safety Standards   Safety standards and technical reports may be purchased online with a credit card or by downloading the Order Form and faxing the order to AMT.  All documents may be obtained in either hard copy or PDF format, please indicate your format of choice when ordering via fax. The following B11's and technical reports are presently undergoing revision: B11.1, B11.9, B11.13, B11.19 and B11.TR3.  ANSI B11.1 2001 Safety Requirements for Mechanical Power Presses The requirements of this standard apply only to those mechanically-powered machine tools commonly referred to as mechanical power presses, which transmit force mechanically to cut, form, or assemble metal or other materials by means of tools or dies attached to or operated by slides... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.2 1995 (R05) Hydraulic Power Presses- Safety Requirements for Construction, Care, and Use The requirements of this standard apply for the construction, care, and use of only those machine tools, commonly referred to as hydraulic power presses, which transmit force hydraulically to cut, form, or assemble metal or other materials by means of tools or dies attached to or operated by slides... More  Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.3 2002 Safety Requirements for Power Press Brakes The requirements of this standard apply to those machine tools classified as power press brakes (hereinafter referred to simply as “press brakes”), which are designed and constructed for the specific purpose of bending material.  The requirements of this standard also apply to powered folding machines... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.4 2003 Safety Requirements for Shears This standard applies to those mechanically, hydraulically, hydramechanically, or pneumatically powered shears used to cut material by shearing and which utilize a fixed blade(s) and non-rotary moving blade(s)... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.5 1998 (R02) Ironworkers- Safety Requirements for Construction, Care, and Use The requirements of this standard apply to those combination, multipurpose powered machines that punch, shear, notch, cope and form metal or other materials commonly referred to as ironworkers. The requirements of this standard also apply to those single or multipurpose powered machines similar in construction to, and identical in the use of, an ironworker or portions thereof... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.6 2001 Safety Requirements for Manual Turning Machines with or without Automatic Control This standard specifies safety requirements for the design, construction, operation and maintenance (including installation, dismantling, and transport) of the general class of manually controlled horizontal and vertical spindle turning machines. Machines covered by this standard are intended to work metals and other man–made materials... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.7 1995 (R05) Cold Headers & Cold Formers- Safety Requirements for Construction, Care, and Use The requirements of this standard apply for construction, care, and use of only those mechanically-powered machines commonly referred to as cold headers and cold formers, which perform many operations such as shearing, heading, upsetting, extruding, trimming, forming, cold working, or warm forming material by means of tools and dies. This type of equipment generally has the ram in a horizontal position... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.8 2001 Safety Requirements for Manual Milling, Drilling, & Boring Machines with or without Automatic Control This standard specifies safety requirements for the design, construction, operation and maintenance (including installation, dismantling and transport) of manually controlled milling, drilling, and boring machines with or without Automatic Control. This standard also applies to devices that are integral to the machine... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.9 1975 (R05) Safety Requirements for the Construction, Care, and Use of Grinding Machines This standard applies only for the construction, care and use of grinding machines, designed primarily for metal removal, that present grinding tools against workpieces, producing change in shape, size, and surface finish by grinding. This standard also applies to these machines when they are grinding materials other than metals such as glass, ceramics, plastics, and rubber... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.10 2003 Safety Requirements for Metal Sawing Machines This standard specifies safety requirements for the design, construction, modification, operation and maintenance (including installation, dismantling and transport) of a general class of stationary machine tools that use a saw blade (tool) to cut off or change the shape of the workpiece... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.11 2001 Safety Requirements for Gear and Spline Cutting Machines This standard specifies safety requirements for the design, construction, operation and maintenance (including installation, dismantling and transport) of gear and spline cutting machines.  The requirements of this standard apply to machines with single or multiple spindles that are specifically constructed to produce gear teeth by the process of hobbing, milling, shaping, and broaching. It also applies to those machines that shave, hone, lap, or chamfer gear teeth and machines used to produce ratchet, spline, or sprocket teeth... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.12 2005 Safety Requirements for Roll Forming & Roll Bending Machines The requirements apply to construction, care, and use of any power-driven metal forming machine that changes the shape or the direction, or both, of materials by use of rolls, rotary forming dies, and associated tooling... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.13 1992 (R98) Single and Multiple-Spindle Automatic Bar, and Chucking Machines- Safety Requirements for Construction, Care, and Use This standard applies to the construction, care, and use of single- and multiple-spindle automatic bar and chucking machines in which all tool movement is controlled by the machine... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.15 2001 Safety Requirements for Pipe, Tube and Shape Bending Machines The requirements of this standard apply to any power-driven machine designed for bending pipe, tube, and shapes by means of bending dies, clamp dies, pressure dies, mandrels, wiper dies, vertical bending punches, radius dies, wing dies, and associated tooling... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.16 2003 (MPIF #47) Safety Requirements for Powder/Metal Compacting Presses The requirements of this standard apply to those mechanically or hydraulically powered machine tools that are designed, modified, or converted for the compressing of metallic or non-metallic powders... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.17 2004 Safety Requirements for Horizontal Hydraulic Extrusion Presses The requirements of this standard apply to those horizontal hydraulically powered presses that extrude metals by means of applying sufficient pressure to an individual metal billet, confined within a container, to force the metal to be extruded through the configured openings of a die... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.18 2006 Safety Requirements for Machines and Machinery Systems for Processing or Slitting or Non-Coiled Metal Strip, Sheet or Plate Applies to machines, and groups of machines arranged in production systems, for processing coils of strip, sheet, or plate material through the machines that shape, size or otherwise convert the material into desired part or material configurations... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.19 2003 Performance Criteria for Safeguarding provides performance requirements for the design, construction, installation, operation and maintenance of the safeguarding (guards, safeguarding devices, awareness devices, safeguarding methods, safe work procedures)... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.20 2004 Safety Requirements for Integrated Manufacturing Systems Specifies the safety requirements for the design, construction, set-up, operation and maintenance (including installation, dismantling and transport) of integrated manufacturing systems... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      ANSI B11.21 2006 Safety Requirements for Machine Tools Using Lasers For Processing Materials Applies to machine tools using laser radiation to process materials. The standard describes the hazards generated by such machines and states the safety measures to be incorporated into such machines... More Member Current Issue Price (digital): $30.00      Non Member Current Issue Price (digital): $65.00      1 | 2 | Next > For more information contact: clhaas@AMTonline.org

Contact Us     |     PRIVACY POLICY     |     Terms of Use

© 2004 AMT-The Association For Manufacturing Technology  AMT@AMTonline.org  7901 Westpark Dr., McLean, VA 22102-4206 Tel.703-893-2900   Fax 703-893-1151